Titanium foil is a titanium plate, strip, roll or sheet with a thickness of less than or equal to 0.1mm. The width of the titanium foil is cut according to the user's requirements. The maximum width of the rolled titanium foil is about 600mm. Titanium and alloy foils are mainly used in electronics, aerospace, instrumentation and other sectors.
Specification:
| Size |
0.025-75MM |
| Production Standards |
ASTM B265 / ASME SB265/ AMS 4911 /ASTM F67 / ASTM F136/ISO 5832-2 / ISO 5832-3 |
| Titanium Grades |
Gr1 Gr2 Gr3 Gr4 Gr5 Gr6 Gr7 Gr9 Gr11 Gr12 Gr23 Ti15333 BT1-00 BT1-0 BT1-2 |
| Surface Finishes |
Acid surface or polishing, sand blasted surface |
1.Titanium Foil Ti 15V-3Al-3Cr-3Sn cold rolled (Titanfolie Ti15-3-3-3)
Instead of forcing Grade 5 to be cold rolled - switch to Ti 15-3-3-3 showing very similar mechanical properties. AMS 4914 is a possible specification to be used.
|
Property |
Value |
Tensile Strength |
102 to 137 ksi |
703 to 945 MPa |
0.2% Proof Stress |
100 to 126 ksi |
689 to 869 MPa |
Elongation over 2 Inches % |
12% min |
12% min |
These products have been used typically in applications requiring high strength-to-weight ratio and stability up to 550 °F (288 °C), but usage is not limited to such applications. Parts are typically formed in the solution heat treated condition and subsequently precipitation heat treated to final condition.
2. Titanium Alloy Grade 5 Foil Ti6Al4V ELi cold rolled (Titanfolie Grade 5)
Have you ever been seeking Titanium Foil? Cold rolled below 0.38 mm? As a flat sheet or a 3 m long strip? Up to 300 mm width? Now you can order such foils! From Ylasting. On Picture is shown a flat sheet in 0.025 mm. We do however offer down to 0.025 mm!
Hot Processing Ti Grade 5 / Ti6Al4V
Titanium Alloy is hot rolled from Plates to Sheets. Thinnest Titanium Sheet hot rolled available is about 0.4 mm of thickness. Sheets are cross rolled. Anything below 0.4 mm must be cold rolled.
Titanium foil has a wide range of applications, including but not limited to:
Electronics: Used in the manufacture of electronic equipment, such as treble membranes for speakers.
Aerospace: Skin insulation material for aircraft.
Chemical Industry: Used in the manufacture of chemical equipment.
Medical: Used in the manufacture of medical devices, such as bone implants.
Precision manufacturing: used for the manufacturing of precision parts.
Precision Slitting
Titanium Grade 1, Grade 2, 3.7025, 3.7035
Widths: 0.090 in. l2.29 mm) to 12.5 in. 4317 mm)
Gauges: Q.0018 in. (0.046 mm) to 0.040 in. (1.02 mm)
Precision Slitting: For gauges 0.0018 in. (0.046 mm) to 0.007 in. (0.18 mm),
Slit widths 0.023 in. (0.58 mm) to 12.5 in. (317 mm)
Coil Weights: 190 PIW max for 0.010 in. (0.25 mm) and above
Edges: #1 (Rounded Edge), #3 (As Slit), #5 (Deburred)
Widths: 40.023 in. (0.58 mm) to 1.000 in. {25.4 mm)
Coil Weights: 1 pound to 190 pounds max for 12’.’ ID I
Our in-house physical and chemical testing lab assures you of on time deliveries and the consistency you demand.
Metallurgical Engineering Staff
General Electric and Pratt & Whitney (LCS) approvals
Ylasting can manufacture any size and grade titanium foil.
foil product is stocked throughout our network to allow for fast, off-the-shelf delivery of common sizes and grade.
We also manufacture custom sizes and can arrange for stocking programs for quick turnaround on a just-in-time basis for quantities of less than mill minimum.
EN
